Ducks Unlimited Member Forums




Mossberg 935 troubles

Author Message
 Posted 4/17/2014 9:15:51 PM
 

Group: Forum Members
Last Login: 4/18/2014 10:32:30 AM
Posts: 1, Visits: 6
I have had a mossberg 935 for almost 3 years now and have really been pleased with its performance. I clean it usually 2-3 times a season thoroughly along with quickly cleaning it after each hunt. This season it has started not completely closing after each shot, thus not plowing a follow up shot. After every hunt this occurred I completely cleaned it which would help for a little while. Any suggestions on what to do? It's something with the bolt because it is cycling to the next round but the charging handle (which comes back about an inch when you pull on it before the bolt starts to come back) will not go all the way forward and complete the closing of the bolt. Any advice is greatly appreciated
Post #775941
Add to Twitter Add to Facebook
 Posted 4/18/2014 7:47:02 AM
 

Group: Forum Members
Last Login: 5/25/2016 11:00:19 AM
Posts: 524, Visits: 9,419
Get a spotlight and look closely at every bearing surface (where things touch) for any gook, seeds, etc.  Disassemble things as far as you're comfortable and use toothpicks to probe everywhere for junk.  It'll surprise you what you can find after you think you've given the gun a good cleaning.  Also, with the spotlight, you might see wear problems otherwise hard to uncover.  
Post #775943
Add to Twitter Add to Facebook
 Posted 12/8/2015 7:04:38 PM
 

Group: Forum Members
Last Login: 7/11/2016 4:24:44 PM
Posts: 48, Visits: 357
If you are shooting mostly 3" shells you could have a build up cause this in the chamber. Clean the chamber thoroughly and maybe hone it to smooth it out. Have seen a couple with this problem and that trick worked.

Leaky

If it aint ducks, dogs or boats I cant talk now!
Post #779313
Add to Twitter Add to Facebook
 Posted 12/10/2015 3:12:24 PM
 

Group: Forum Members
Last Login: 22 minutes ago
Posts: 124, Visits: 683
What you are describing sounds like a potential bolt problem. See if there is any gunk inside the bolt carrier group, preventing it from closing all the way. The other potential issue is a weak or gummed up spring somewhere, causing it to lose "power" at the very end of the bolt return.





-Mike

Dogtra Field Staff
Buck Gardner Calls Pro Staff
Post #779318
Add to Twitter Add to Facebook
 Posted 12/12/2015 5:43:23 PM
 

Group: Forum Members
Last Login: 7/24/2016 6:24:32 PM
Posts: 1,333, Visits: 8,366
I second the notion of a weak/broken return spring

"When you hear my third shot.....that's your signal to take 'em."
-Phil Robertson
Post #779326
Add to Twitter Add to Facebook


Similar Topics

Expand / Collapse